If Your Hot Water System Fails: Quick Action Guide
If Your Hot Water System Fails: Quick Action Guide
Blog Article
Are you searching for details concerning How to Troubleshoot and Repair an Electric Water Heater?
Several modern-day houses make use of an electrical water heater for their furnace, because of its comfort as well as convenience of use. Nonetheless, much like any other electrical appliances, problems might occur with its use, all of a sudden. It can be actually aggravating to wake up to a cold shower rather than a hot one or having your bathroom with water that isn't warm sufficient or perhaps as well hot. Whatever the instance may be, water heater troubles can be rather stressful. The good news is, we've made a checklist of possible options to your hot water heater concerns. There are a variety of aspects that can cause many of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the primary power supply for safety and security. Whatever the issue is, getting it repaired need to not position too much of a problem if you follow these actions:
Call A Professional:
If after replacing all faulty components and resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for an expert opinion. The trouble with your heater could be that the cold and hot taps have actually been switched or it might be undersized for the amount of hot water needed in your house. Whatever the case might be, an expert plumber would aid solve the trouble.
Examine Your Power Supply:
As standard as this may seem, it is extremely needed. Without adequate power, your water heater will not operate. So the first thing to do when your water instantly stops working is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the breaker is the problem, merely transform it off and on once more. Change any kind of busted or damaged fuse. Test the home appliance with power after these adjustments to see if it's now functioning.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm enough, you may need to examine the temperature level settings on your upper thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open the gain access to panel and also press the red switch for temperature reset above the thermostat. This should help heat the water. Turn the breaker back on and also examine if the issue has actually been solved.
Check the Burner in the Hot Water Heater:
If it's not a power trouble, then attempt having a look at your heating element if it is still functioning. Check each of your burner to ensure the trouble isn't with any of them. If any of them is malfunctioning, change that part and after that examine whether the warm water is back on.
Verdict
Hot water heater issues are not always major. Most of them result from small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning components ought to work. Nevertheless, if you are still not able to resolve the trouble, give a call to your nearby plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was introduced to that article about What Would Cause My Electric Water Heater to Stop Working? from a good friend on our other site. If you appreciated our article kindly don't forget to pass it around. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Browse Website Report this page